PEUGEOT
Sagem S2000
STEP 1
Find 95160 EEPROM memory on the ECU. Unsolder it and read its content.
STEP 2
Using a programmer, read the content of the ECUs FLASH memory
Find the values in the TEXT section of line 00000000( marked in blue)
Read values : E L M E
(This is only an example. Read values will be different in every ECU)
STEP 3
Remove 24C02 memory from S.O.S Pro Emulator
STEP 4
Make a byte swap – see example below :
Write these values onto the 24C02 memory unsoldered from S.O.S pro Emulator
Attention!
- The values have to be written in the TEXT section, not in the HEX section.
Pay attention to the letter size!
STEP 5
Solder back the 24C02
Use tin to bridge leg 7 and 8 of the 24C02 memory
To choose the program you have to solder specific jumpers on the Emulator
(If it doesn’t work, solder jumpers 1+2+4+5+6 )
STEP 6
Connect the S.O.S Pro Emulator to the ECU according to the diagram below.
Connect S.O.S Pro Emulator to the ECU according the picture on the right
