Bosch 0 261 203 484

BMW

STEP 1

Connect ECU to INPA vehicle and find ISN code

(You can contact us for the password you will write.)

STEP 2

Unsolder 24C02 memory from the back of S.O.S Emulator

STEP 2

Write these values onto the 24C02 memory unsoldered from S.O.S Pro

ATTENTION: The picture shows exapmle values.
These values are different in every ECU.

STEP 3

Solder back the 24C02 memory

Use tin to bridge led 7 and 8 of the 24C02 memory

STEP 4

To chose the program you have to solder specific jumpers on the back of the Emulator:

3 + 4 + 5 + 6

STEP 5
Connect the S.O.S Pro Emulator to the ECU according to the diagram below.

Cut off immo line (code) marked on the picture.

Disconnect the EWS

STEP 6
To start the car, connect two pins of the starter relay.