STEP 1
Find the EEprom memory on the ECU. Unsolder the eeprom memory and read its content.
STEP 2
Read the values from line 80 or 100 of the text section
(Optionlly: line 8080 or 8100)
ATTENTION: The picture shows example values.These values are different in every ECU.
STEP 3
Remove 24C02 memory from S.O.S Pro Emulator
STEP 4
Write the values from Step 2 into the 24C02 memory unsoldered from S.O.S Pro Emulator
Adresses: Text section (see picture)Values: Values from Step2.
Solder the memory back into S.O.S Pro Emulator.
STEP 5
Solder back the 24C02
Use tin to bridge leg 7 and 8 of the 24C02 memory
To choose the program you have to solder specific jumpers on the Emulator
STEP 6 Connect the S.O.S Pro Emulator to the ECU according to the diagram below.