PEUGEOT
Magneti Marelli IAW 48P2.x
STEP 1
Find FLASH memory on the ECU. Unsolder it and read its content.
STEP 2
Using a programmer, read the content of the ECUs FLASH memory
Find the values in the TEXT section of line 04040( marked in blue)
Read values : C6MN
(This is only an example. Read values will be different in every ECU)
STEP 3
Remove 24C02 memory from S.O.S Pro emulator
STEP 4
Change the order of the values in the following way
STEP 5
Write the values into the 24C02 memory from S.O.S Pro Emulator:
Adresses: Text section (see picture) Values: Values from Step 2.
Solder the memory back into S.O.S Pro Emulator
STEP 6
Solder back the 24C02
Use tin to bridge leg 7 and 8 of the 24C02 memory
To choose the program you have to solder specific jumpers on the Emulator
(If it doesn’t work, solder jumpers 2+4+5+6 )
STEP 7
Connect the S.O.S Pro Emulator to the ECU according to the diagram below.
