STEP 1
Read the content of the memory.
Read values from lines 000 to 003 of the text section
ATTENTION: The picture shows exampe values.These values are different in every ECU.
STEP 2
Remove 24C02 memory from S.O.S Pro Emulator
STEP 3
Write the values that you readin step 1 into the 24C02 memory from S.O.S Pro Emulator
Solder the 24C02 memory back into the emulator.
STEP 4
Solder back the 24C02
Use tin to bridge leg 7 and 8 of the 24C02 memory
To choose the program you have to solder specific jumpers on the Emulator
STEP 5 Connect the S.O.S Pro Emulator to the ECU according to the diagram below.