Manufacturer | Condition | Weight |
---|---|---|
M4Key | New | 20 g |
PSA EMERGENCY START OBD MINI
SIEMENS, JOHNSON CONTROLS , JCI, VALEO AND CONTINENTAL BY EMERGENCY START OBD II
(without the new vehicles with Delphi BSI).
PSA Emergency Start / PSA Bypass Mini
PEUGEOT Citroën PSA supports all BSI down below :
BSI LIST:
- Siemens D76F0018+95160 KLINE (BSI-E0X-00/BSI-F0X-00) . EEPROM 95160
- Siemens 1L00M+95128/95256 CAN (BSI-S0X-00). EEPROM 95128/95256
- Continental SC667050+95256 CAN (BSI-Q0X-00). EEPROM 95256
- Valeo 4L00M+95128/25128 CAN (BSI2004-P0X-00).EEPROM 95128/25128
- Valeo 2M48H+24C128 CAN (BSIEV-X0X-00) . EEPROM 24C128
- Valeo SC667152+95256 CAN (BSI-N0X-00). EEPROM 95256
- Johnson Controls easyCAN4+29LV400+95128 CAN (BSI2004-H0X). EEPROM 95128
- Johnson Controls easyCAN4F1M-32+95128 CAN (BSI04EV-K0X). EEPROM 95128
- Johnson Controls SPC560B60+95128 CAN (BSI04EV2-KEX). EEPROM 95128
Supported cars:
Peugeot 1007, Peugeot 206 (1,4 HDI, 2.0 HDI), Peugeot 207, Peugeot 306 (2.0 HDI), Peugeot 307 (2.0 HDI), Peugeot 307 2005+, Peugeot 208 2012+, Peugeot 2008 2013+, Peugeot 301 2012+, Peugeot 308, Peugeot 3008, Peugeot 508, Peugeot 5008, Peugeot 406 (2.0 HDI), Peugeot 407, Peugeot 607 2006+, Peugeot 807 2006+, Peugeot Expert II, Peugeot Partner (2.0 HDI), Peugeot Ranch (2.0 HDI), Peugeot Partner 2008+Citroen C2, Citroen C3 (1.4 HDI), Citroen C3 2006+, Citroen C3 II, Citroen DS3, Citroen C4, Citroen C4 Picasso, Citroen C4 II, Citroen DS4, Citroen C5 (2.0 HDI), Citroen C5 2004+, Citroen C5 II 2007+, Citroen DS5, Citroen C6, Citroen C8 2007+, Citroen Jumpy II, Citroen Xsara (2.0 HDI), Citroen Xsara Picasso (2.0 HDI), Citroen Saxo (1.4 HDI), Citroen Berlingo (2.0 HDI), Citroen Berlingo 2008+, Citroen Xantia (2.0 HDI), Lancia Phedra 2008+, Citroen Picasso (2.0 HDI), Citroen C-Elysee 2012+
Usage Requirements:
- Car has to be equipped with mechanical key.
- Car has to be equipped with original parts.
- The device will work only in case of a lost key.
How to work with PSA EMERGENCY START OBD MINI?
- To use PSA EMERGENCY START OBD MINI you just need to connect it to the OBD2 socket in the car.
- When the product is connected to OBD, the red LED (power) will stay lit. This means the power is on.
- When we plug the product into OBD, it will automatically enter PIN code reading mode for 10 seconds.
- After 10 seconds, the green LED (code) will blink fast, the PIN has been read, the product is ready. (It is waiting for you to turn on the ignition).
- When you open the contact, the green LED will stay still. (Emergency start mode is ready.)
- The car is ready to start.
- If the car is not working normally, then retry the procedure from the beginning.
PSA Emergency Start OBD Mini Led and Button Status:
- Red LED (Power)
- Green LED (Code)
- Blue LED (Can-speed mode.)
Note
Device is sold only for official use. If you use it for any illeagal purposes, this is your own responsibility!
Attention!
- When the green LED (code) starts blinking, the device succesfully has read the PIN code.
- When you turn the ignition on, if the car is not working, please change 500kB/s can-speed to 250kB/s by pressing the button on the device. (Blue LED)
There are no reviews yet.