Menu
Magneti Marelli IAW4EF.P4
STEP 1
Find 95160 EEPROM memory and unsolder it
STEP 2
Using a programmer, read the content of the ECUs EEPROM memory
Find the values in addresses from 042 – 047 (marked in blue)
Read values: 69 | 1D | D0 | 01 | 84 | DF
ATTENTION: The picture shows example values.
These values are different in every ECU.
STEP 3
Remove 24C02 memory from S.O.S Pro Emulator
STEP 4
Write these values onto the 24C02 memory unsoldered from s.o.s pro emulator.
STEP 5
Solder back the 24C02
Use tin to bridge leg 7 and 8 of the 24C02 memory
To choose the program you have to solder specific jumpers on the Emulator
(If it doesn’t work, solder jumpers 2+4+5+6 )
STEP 6
Connect the S.O.S Pro Emulator to the ECU according to the diagram below.
Attention!
Disconnect antenna coil from ignition switch!
