Bosch ME7.3.2 / ME7.1.1 Maserati (K-line) - M4Key Automotive Solutions

BOSCH ME7.3.2 / ME7.1.1

STEP 1

Find 5P08C2 (35080) EEPROM memory and unsolder it

STEP 3

Using a programmer, read the content of the ECUs EEPROM memory

Find the values in addresses from 012 – 015 (marked in blue)

Read values: 34 | 24 | FF | 01

ATTENTION: The picture shows example values.
These values are different in every ECU.

STEP 4

Remove 24C02 memory from S.O.S Pro Emulator

STEP 5

WRİTE these values onto the 24C02 memory unsoldered from s.o.s pro emulator.

STEP 6

Solder back the 24C02

Use tin to bridge leg 7 and 8 of the 24C02 memory

To choose the program you have to solder specific jumpers on the Emulator

STEP 7
Connect the S.O.S Pro Emulator to the ECU according to the diagram below.

Attention!

Disconnect immo box!